After taking a bath, did you notice that water was leaking from under the shower cabin? A wet floor can mean several faults. They are a nuisance and can even lead to flooding of the bathroom of neighbors living on the floor below or next door. We present possible causes of leakage from under the shower cabin and explain how to fix the problem.

Leaks in the installation

A very common cause of water leaking from the shower into the bathroom is a leak between the siphon and the drain. When the siphon casing does not adhere well to the shower tray, all the water does not reach the flexible pipe through which it could flow into the sewage system (some of it leaks out). There should be a special rubber seal in this place to protect against water leakage. How to seal a shower tray siphon? The worn gasket should be replaced with a new one, ensuring that it adheres tightly to the siphon surface.

Another reason for dripping from the shower may be a poorly installed seal connecting the drain pipe and the sewage outlet. The seal must fit snugly to the surface. In some cases, it is necessary to replace the drain pipe (plastic pipes deteriorate quite quickly).

You should also make sure that the part of the siphon in the shower tray is very well connected to the element under the shower tray, as uneven twisting will result in water leakage.

To check the places that cause leaks from under the shower cabin, it is necessary to remove the panel covering the shower tray. The task requires high precision, so it is worth entrusting it to a company providing specialized plumbing services, which will quickly diagnose the cause of the fault and remove it efficiently without exposing the installation to accidental damage.

Choose the professional shower repairs Melbourne who offer prompt, reliable, and high-quality services to restore your shower to its optimal condition, ensuring durability and customer satisfaction.

Connections between the shower tray and the wall

Water leaking from under the shower cabin may also be caused by inadequate protection of the connections between the shower tray and the walls. It is important to properly seal the connections between the partition and the shower tray.

Which silicone should I choose?

The gaps between the shower tray and the walls will be perfectly filled with quick-drying sanitary silicone resistant to high temperatures, mold, fungi and chemicals. The joint created in this way will be durable and ensure proper hygiene. It is worth remembering that new silicone should be applied only after cleaning the surface from the previous layer and thoroughly degreasing it. You can squeeze semi-liquid sanitary silicone from the cartridges using a special tool.

A layer of colorless silicone may also be necessary at the junction between the shower tray and the shower cabin (if a special seal was not included in the kit).

Note the lack of joint protection

When all joints are properly sealed, it is worth looking for the causes of water leaking from under the shower tray in the joints. Ceramic tiles on the wall to which the cabin is adjacent should be connected with hydrophobic grout. This way, water drops will not penetrate their surface. What to do when classic joints are used? In this case, a sealant will be useful.

Leaking shower panel or handset

Water leaking from under the cabin is not the only problem with the shower. What to do if water is leaking from the shower head? In this case, the most common cause is a worn gasket. A leaking shower head usually needs to be replaced (it is not expensive). A leaking shower panel may mean that the water pressure is insufficient (it should be about 3 bar).