Even though ceramic tiles do not allow water to pass through, waterproofing must be done before laying them on the bathroom floor. This is because cracks may appear in the tiles so moisture can get inside. In this case, mould or mildew is likely to occur. In addition, you run a high risk of flooding your neighbours with water.

Let’s look at the basic steps taken when waterproofing a bathroom.

Preparation

At this stage, you need to check the quality of the screed. Cracks and severe unevenness must be eliminated. There should be no debris or greasy stains on the surface. It is essential to tidy up the cold and hot water supply pipes to prevent leaks during their operation.

Corner treatment

The most excellent attention should be paid to the wall seams. For these purposes, use a special tape. First, prepare a small amount of coating waterproofing and treat the surface where the walls meet the floor.

Then, bend the tape in half and press it into the solution. After this, a second layer of waterproofing is applied to it.

Applying waterproofing to the floor

Having completed the treatment of the corners, the waterproofing solution is applied to the floor using a spatula and allowed to dry for 12 hours. When the first layer has dried, begin applying the second layer. The tiles can be laid 24 hours after completion of waterproofing work.

When it comes to shower waterproofing in Melbourne, many companies offer their services, but Omnidry stands out as the best. With years of experience and a proven track record of success, Omnidry can ensure your shower is leak-proof and worry-free.

Waterproofing wall joints near bathtubs and shower stalls

When you lay the tiles and install a bath or shower, the junctions with the wall must be protected from moisture. We recommend using a special sealant. They fill the joints using a mounting gun. Then, a ceramic or plastic corner is installed on top, attached to liquid nails.

If you waterproof your bathroom correctly and carefully, you will never flood your neighbours living on the floor below, and moisture will not accumulate behind the bathtub or shower.